Breaking News
Sunday, September 7, 2014

How to Know Cause of Death Due Easy Engine AC

How to Know Cause of Death Due Easy Engine AC - AC is taking a big role in making the engine work harder. Because the system is directly dependent on engine rpm, setting error will actually make the machine heavier when driving. The main signs that often appear as if the machine is going to be dead when it stops. There is also, in a speed lace, the gas must be pressed deeper than usual.

If it happens, it's time to recognize some of the several causes behind the symptoms. One of the reasons could be due to the lack of proper idle setting. Ideally, when the silence and the ac is not turned on, the machine will move around 800 rpm. If the air conditioner is on, the rpm will go up to 900 - 1000 rpm. This means that if the rpm under the normal provisions, the machine will be very easy to die. This case is rare on the car manifold injection, because it is set up with the electrical system. But it also does not rule out the possibility that it is still necessary settings manually.

Sirkulai poor can also caused the compressor to work extra. In cases like this, of the spin machine was only increasing the weight. Circulatory disorders can be caused by the dust and cause the condenser or evaporator is interrupted.

See also : Tips to Overcome Engine Shut After Oil Change

Compressor is too large and does not fit standard machine also can be caused even drop. It can be caused by the compressor is damaged or does not match the standard changed. Or the last possibility is that the engine is less maintenance. AC is weighing on the machine, but on the other hand, sometimes the machine was malfunctioning and needs to be serviced again.
Toggle Footer
===>Klik Gambar Untuk Clos